12v High Power Led Driver
This 12v, 300w, 25Amp IP67 rated constant voltage type LED driver is an ideal product for powering our 12v LED products and it is suitable for use in wet or dry environments such as swimming pools, kitchens or bathrooms.
12v high power led driver
This 12v, 300w, 25Amp IP67 rated constant voltage type LED driver is an ideal product for powering our 12v LED products and it is suitable for use in wet or dry environments such as swimming pools, kitchens or bathrooms. The driver is supplied with wire tails on the input and output sides which need to be connected to a suitably rated junction box to maintain the IP67 rating.
As we recommend that a driver should power products at approximately 80% of the value of the driver, the recommended load for this 300w unit is approximately 240W. It is good practice to specify a driver with a capable load is more than the product it is powering but it must not be connected to a load greater than the 90% tolerance of the driver otherwise this will shorten the life of the unit.
Built-in active PFC
170-265 VAC 50/60 Hz
300 W max
12VDC ± 5%
25 A max
145%-160% hiccup mode, auto-recovery
Protection type:recovers automatically after condition is removed
-40 - 50 ºC
Free air convection
Input:VDE H03VV-F 3G0.75mm2 / Output:VDE H03VV-F 2*0.75mm2
5 Pcs/ Carton
100% full load burn-in test
Protections: Short circuit, over load ,over temperature
High efficiency, low ripple noise
Two years warranty
Ideal for outdoor LED lighting, LED street lights, LED tunnel lighting and so on
Mechanical Specification :