12V 40w Led Driver
40w led driver Descriptions of 40w led driver: Smarts 0-10V dimmable 40w led driver is PWM constant voltage led driver. The range of input voltage is 100-130V/170-265Vac. Output voltage have 12vdc and 24vdc two version choose. The PF is 0.9 and the Full Load Efficiency is 88%. Frequency Range is...
40w led driver
Smarts 0-10V dimmable 40w led driver is PWM constant voltage led driver. The range of input voltage is 100-130V/170-265Vac. Output voltage have 12vdc and 24vdc two version choose. The PF is 0.9 and the Full Load Efficiency is 88%. Frequency Range is 47～63HZ. For this dimmable transformer we design it as high quality with no flicker and no load limited. Our company has test the dimmer of Lutron that is more suitable connect with our dimmable led driver.
Power Factor ( Typ.）
PF≧0.90/110V / PF≧0.90/220V
Full Load Efficiency（Typ.）
﹤0.35mA/120VAC / ﹤0.7mA/220VAC
Protection type: Hiccup mode, recovers automatically after fault condition is removed
100℃±10℃ shut down o/p voltage, re-power on to recover
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH
Compliance toEN55015,EN61000-3-2 (≧50%load)
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry
355*215*215mm/20pcs /CTN 185*65*45mm for inner box
1. All parameters NOT specially mentioned are measured at 110V~220VAC input , rated load
and 25℃of ambient temperature.
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3. Tolerance:includes set us tolerance,line regulation and load regulation .
Here are a few things that you need to avoid when you choose driver:
Failed LED driver
These are all inconveniences that are await you should you mismatch the electronics of the LED driver and the dimmer.