Dc Switching Power Supply

Dc Switching Power Supply

A 72W 12V/5A Highly Reliable, Universal AC input/full range single output power supply. They have the approval of UL and CE and come 100% full load burn-in tested and are protected with overload/over voltage/short circuit.

Chat Now

Product Details

DC switching power supply 


A 72W 12V/5A Highly Reliable, Universal AC input/full range single output power supply. They have the approval of UL and CE and come 100% full load burn-in tested and are protected with overload/over voltage/short circuit.

Specification: 
Complies with RoHS Directive
AC Input Voltage Range: 100-240VAC
Input Frequency: 47-63Hz
Dimensions: 111 x 78x 36mm
Input current : 0.6A/230vac  , 1.0A/115vac
Inrush Current: Cold Start, 25A/110V, 45A/230V
Load Regulation : <± 0.5%
2 years warranty
Output Voltage Adj. Range  12v±0.5vdc
Output Overcurrent Protection
Output Over Voltage Protection
over heat protection
Start,Raise,Stable time :500ms ,33ms,17ms/230vac , 500ms ,30ms,16ms/115vac
Operation Temp : -25 - 55°C
Store Temp : -40 - 80°C
Raise Temp 《 25°C
Operation humidity : 5-95%RH
Output Ripple 《 240MV
Load Regulation 《±10%
ETL Ref. Number: 5005044
EMC Standards: EMC Standard:EN55015,EN61000,EN61547 


Size Image: 

DC switching power supply


A 72W 12V/5A Highly Reliable, Universal AC input/full range single output power supply. They have the approval of UL and CE and come 100% full load burn-in tested and are protected with overload/over voltage/short circuit.

Specification:
Complies with RoHS Directive
AC Input Voltage Range: 100-240VAC
Input Frequency: 47-63Hz
Dimensions: 111 x 78x 36mm
Input current : 0.6A/230vac  , 1.0A/115vac
Inrush Current: Cold Start, 25A/110V, 45A/230V
Load Regulation : <± 0.5%
2 years warranty
Output Voltage Adj. Range  12v±0.5vdc
Output Overcurrent Protection
Output Over Voltage Protection
over heat protection
Start,Raise,Stable time :500ms ,33ms,17ms/230vac , 500ms ,30ms,16ms/115vac
Operation Temp : -25 - 55°C
Store Temp : -40 - 80°C
Raise Temp 《 25°C
Operation humidity : 5-95%RH
Output Ripple 《 240MV
Load Regulation 《±10%
ETL Ref. Number: 5005044
EMC Standards: EMC Standard:EN55015,EN61000,EN61547


Size Image:

blob.png


In order to ensure the safety, please note:
1. Select the correct input voltage and the input and output connection method.
2. Do not peel off the power before installing a protective layer to prevent foreign matter falling into the lead when the power supply is damaged.
3. After installation please tear in addition to the protective layer, so as not to affect the power cooling.
4. To avoid electric shock, do not disassemble the power supply chassis.

Product installation instructions:
1, the installation, use a length of less than 4mm screw fixing the power supply reliability.
2, before the installed power run, check and proofread each wiring terminals on, make sure the input and output, AC and DC, positive and negative voltage.
And current values such as the right to eliminate wrong connection reverse phenomenon, to avoid damage to the power supply and user equipment.
3. Use a multimeter to measure power before hot, neutral and ground short circuit, the output is shorted; load when power is the best start.
4. Do not exceed the power supply when using the nominal value, so as not to affect the reliability of the product. To change the power supply output parameters .
5, in order to ensure the safety and reduce the use of interference, ensure reliable grounding ground (grounding wire more than AWG18 #).  
6. Do not frequent switching power supply, or affect their life.
7. such as power failure, please do not repair them, please contact the company as soon as possible to resolve .


blob.png


In order to ensure the safety, please note:
1. Select the correct input voltage and the input and output connection method.
2. Do not peel off the power before installing a protective layer to prevent foreign matter falling into the lead when the power supply is damaged.
3. After installation please tear in addition to the protective layer, so as not to affect the power cooling.
4. To avoid electric shock, do not disassemble the power supply chassis.

Product installation instructions:
1, the installation, use a length of less than 4mm screw fixing the power supply reliability.
2, before the installed power run, check and proofread each wiring terminals on, make sure the input and output, AC and DC, positive and negative voltage.
And current values such as the right to eliminate wrong connection reverse phenomenon, to avoid damage to the power supply and user equipment.
3. Use a multimeter to measure power before hot, neutral and ground short circuit, the output is shorted; load when power is the best start.
4. Do not exceed the power supply when using the nominal value, so as not to affect the reliability of the product. To change the power supply output parameters . 
5, in order to ensure the safety and reduce the use of interference, ensure reliable grounding ground (grounding wire more than AWG18 #).   
6. Do not frequent switching power supply, or affect their life. 
7. such as power failure, please do not repair them, please contact the company as soon as possible to resolve .   


Hot Tags: dc switching power supply, China, manufacturers, suppliers, factory, wholesale, price, in stock
Related Products

Inquiry